HP windows vista or windows 7 laptop need to troubleshoot on the message “Boot Device Not Found” error message. The error on your hard drive can be fixed, and may be the error can signal the end of your hard drive.For "Boot Device Not Found" error message ,you need windows 7 support which can stop this message and make the by default windows 7 operating system setting.
The below mentioned Steps will help manually to restore the BIOS back as a default setting ,running the HP hard disk test or recovering the windows vista or windows 7 operating system as a default setting.
Steps to reset the BIOS
Step1: switch on your HP laptop with Windows Vista or Windows 7 and press the "Esc" key repeatedly to access the startup Menu. Press "F10" to access the BIOS.
Step2: Press "F9" to restore the BIOS to its default settings. Press "Enter" to verify that you want to restore the BIOS default settings.
Step3: Press "F10" to save your changes and exit the BIOS. Press "Enter" to confirm that you want to save the BIOS changes and continue booting up the laptop. Proceed to Section 2.
Steps to HP Hard Disk Test
Step1: press the power button for 15 seconds when the laptop is turned on to turn off the laptop. And then again press the power button when turn on the laptop and press the "Esc" key repeatedly to access the startup Menu.
Step2: Press “F2” to access the System Diagnostics. Click “Hard Disk Test” to begin testing the hard drive. If “Pass” is displayed after all of the tests then the program fixed the error. If “Fail” is displayed after any of the tests, proceed to Section 3 if you are using Windows Vista and Section 4 if you are using Windows 7.
Steps to recover windows vista factory settings
Step1: Click "Start," >"All Programs," >"Recovery Manager" > "Recovery Manager" again to open the HP Recovery Manager.
Step2: Click "Advanced Options,"> then click "System Recovery" > "Next." The laptop will restart and will boot up to the HP Recovery Manager.
Step3: Click "System Recovery" > click "Next."> Click "No" when asked if you want to use Microsoft System Restore and click "Next." Select "Recover without backing up your files" and click "Next." Click "Next" to begin the recovery process. When the process is finished the laptop will restart and boot to the Windows Vista setup screen.
Steps to recover windows 7 factory settings
Step1: Click "Start," >"All Programs," >"Recovery Manager" > "Recovery Manager" again to open the HP Recovery Manager.
Step2: Click "System Recovery." The laptop will restart and will boot to HP Recovery Manager. Click "System Recovery," then click "Next." Click "No" when asked if you want to use Microsoft System Restore and click "Next."
Step3: Click "Recover without backing up your files" > click "Next." >Click "Next" to begin the recovery process. When the process is finished the laptop will restart and boot to the Windows 7 setup screen.
Note:If you are not able to work on the above steps, you can reach online technical support from V tech-squad at their Toll Free No +1-877-452-9201.
The below mentioned Steps will help manually to restore the BIOS back as a default setting ,running the HP hard disk test or recovering the windows vista or windows 7 operating system as a default setting.
Steps to reset the BIOS
Step1: switch on your HP laptop with Windows Vista or Windows 7 and press the "Esc" key repeatedly to access the startup Menu. Press "F10" to access the BIOS.
Step2: Press "F9" to restore the BIOS to its default settings. Press "Enter" to verify that you want to restore the BIOS default settings.
Step3: Press "F10" to save your changes and exit the BIOS. Press "Enter" to confirm that you want to save the BIOS changes and continue booting up the laptop. Proceed to Section 2.
Steps to HP Hard Disk Test
Step1: press the power button for 15 seconds when the laptop is turned on to turn off the laptop. And then again press the power button when turn on the laptop and press the "Esc" key repeatedly to access the startup Menu.
Step2: Press “F2” to access the System Diagnostics. Click “Hard Disk Test” to begin testing the hard drive. If “Pass” is displayed after all of the tests then the program fixed the error. If “Fail” is displayed after any of the tests, proceed to Section 3 if you are using Windows Vista and Section 4 if you are using Windows 7.
Steps to recover windows vista factory settings
Step1: Click "Start," >"All Programs," >"Recovery Manager" > "Recovery Manager" again to open the HP Recovery Manager.
Step2: Click "Advanced Options,"> then click "System Recovery" > "Next." The laptop will restart and will boot up to the HP Recovery Manager.
Step3: Click "System Recovery" > click "Next."> Click "No" when asked if you want to use Microsoft System Restore and click "Next." Select "Recover without backing up your files" and click "Next." Click "Next" to begin the recovery process. When the process is finished the laptop will restart and boot to the Windows Vista setup screen.
Steps to recover windows 7 factory settings
Step1: Click "Start," >"All Programs," >"Recovery Manager" > "Recovery Manager" again to open the HP Recovery Manager.
Step2: Click "System Recovery." The laptop will restart and will boot to HP Recovery Manager. Click "System Recovery," then click "Next." Click "No" when asked if you want to use Microsoft System Restore and click "Next."
Step3: Click "Recover without backing up your files" > click "Next." >Click "Next" to begin the recovery process. When the process is finished the laptop will restart and boot to the Windows 7 setup screen.
Note:If you are not able to work on the above steps, you can reach online technical support from V tech-squad at their Toll Free No +1-877-452-9201.
No comments:
Post a Comment